Contact Us Today

208-734-6558

Category Archives: Dairy/ Wash Down

Baldor Stainless Steel Encapsulated Motor- CSSEWDM

CSSEWDM –

Features

  • .5HP to 10Hp, 1155RPM to 3500RPM, 3PH, 60HZ, 215TC, 3756M, TEFC, F
  • Class H Insulated motor
  • All external surfaces are 300 series stainless steel: motor frame, endplates, conduit box, shaft and base.
  • Moisture resistant insulation system
  • Patented bearing seal to protect motor bearings, inside and out.
  • NEMA Premium efficiency and 3-year warranty.

Applications

Food processing, packaging, outdoor and highly corrosive environments, which expose the motor to high pressure washdown.

Baldor Stainless Steel Motors – CSSWDM

CSSWDM – Baldor Stainless steel motors

Features

  • 1HP,1745RPM,3PH,60HZ,56C,3524M,TENV,F1,N
  • All external surfaces 300 series stainless steel: motor frame, endplates, conduit box, shaft, and base
  • Moisture resistant 200°C ISR® (Inverter Spike Resistant) magnet wire
  • Four condensate drains in each endplate
  • Enplate rabbets sealed and conduit box gasketed
  • Lip seals
  • Especially effective in highly corrosive environments where paint or other finishes do not hold up.

Applications

Food processing, packaging, outdoor and highly corrosive environments.

BALDOR NEW HORIZONTAL MOTOR CEWDM SERIES

BALDOR NEW HORIZONTAL MOTOR CEWDM3714T

Features

  • 2HP-10Hp
  • 300 series stainless steel hardware
  • Moisture sealant on bolt heads, between frame and endplates
  • Neoprene gaskets
  • Double sealed bearings
  • Lip and V-Ring seal on drive end
  • Stainless steel shaft extension
  • Electrostically applied epoxy finish over autophoretic primer
  • Class F insulation
  • NEMA Premium® efficiency
  • 3 year warranty

Applications

Food processing and other applications where motors receive washdown on a regular basis.

BALDOR NEW HORIZONTAL MOTOR CEWAM3711T

BALDOR NEW HORIZONTAL MOTOR CEWAM3711T

Features

    • 10HP,3490RPM,3PH,60HZ,215TC,3729M,TEFC,F
    • Proprietary bonded surface coating
    • Stainless steel shaft extension
    • Non-contact rotating labyrinth shaft seal
    • Threaded drain ports
    • Gasketed and sealed conduit box
    • FDA approved surface coating

Weatherproof per IEEE45 and USCG259 marine duty (below deck only)

Applications

The most severe and corrosive applications, those which use intense high-pressure washdown, and marine applications